One of our garage door openers died of old age recently – it was an old builder-model (in other words, as cheap as the builder can get) chain drive opener that was incredibly noisy. I took advantage of the opportunity to reduce the noise made by the garage door opener and the door itself especially since there is a room of the house above the garage.
Here’s what I did in order of increasing cost and effort:
- Oil the hinges, springs, pulley bolts, etc of the door. I used standard household oil (don’t use WD-40, it is technically not a lubricant). Don’t mess with the springs – it is dangerous, only trained technicians should adjust springs. (more info)
- Replace metal door rollers with nylon rollers. I bought two 10-packs of these nylon rulers.
- Install vibration isolators between the garage door opener and the ceiling. I used the RSIC-GDS Motor Kit from PAC International.
- Replace the noisy garage door opener with a quiet opener. I bought a Sommer Direct Drive garage door opener which is very quiet. I’ve also read good things about the LiftMaster 3800 Residential Jackshaft Opener.
After making all of the above changes, we believe the garage doors are about 75% quieter than before!
Hope this helps someone!
Leave a Reply